I found these courses to be challenging yet incredibly rewarding. The knowledge I gained is invaluable, and I would recommend them to anyone seeking a truly enriching learning experience.
Thanks.

Quite complete and helps to familiarize with the details of the rigging and industrial safety trade.

Loved the process and the information contained herein is vital. I will absolutely recommend it to my friends.

it was exciting and challenging very knowledgeable would recommend these courses to anyone

Learning Outcomes

Introduction to Rigging and Lifting

Pre-requirements for a Worksite

Guidance on Rigging and Lifting Equipment - Part 1

Guidance on Rigging and Lifting Equipment - Part 2

Calculation of Load’s Weight, Sling’s Angles and Pressure

Lesson Summary

This module introduces you to the basics of rigging and lifting. Learn about the tools and equipment used for Rigging and Lifting and the best ways to handle them. Realise the best practices to make the work site safe, secure and hygienic. The lessons then guide you in calculating the load weight and the number of methods to determine the weight.

Hitches in Rigging and Lifting

Rigging and Lifting Devices - Part 1

Rigging and Lifting Devices - Part 2

Lifting and Hoisting Instruments

This module covers types of hitches, hitching techniques and various lifting and hoisting instruments like cranes, derricks and forklifts with their best practices. You will understand connection and fitting techniques used for rigging and lifting and get informed about attachment sheaves, blocks, tackles, winches, and drums used in the processes.

Understanding Scaffolding System

Introduction to Ladders

Safety Devices for Protection

This module provides in-depth knowledge of various scaffolds and ladders used in the industry. The lessons guide you through the best ways to use and handle them and make you aware of the general safety and maintenance guidelines. The module also covers different types of safety gear and the best ways to use and properly maintain them.

Rigging and Lifting: Equipment and Devices - Course Assessment

This free online course teaches you how to use rigging and lifting equipment and explains how safety devices operate.

Rigging and Lifting: Equipment and Devices

Rigging and lifting are an important part of any construction project and have a direct impact on the safety of workers and equipment. Every worker at a worksite should possess basic knowledge of how to safely operate the equipment used for the job. This health and safety course provides detailed insight into the principles of rigging and lifting and explains how to use various devices to ensure safe handling and lifting practices.

Rigging and lifting jobs are an integral part of any construction project. They require mechanized equipment that raises the risk of injury and mishap if not handled properly. Rigging and lifting accidents have resulted in the loss of both personnel and material. Each worker at a worksite requires some primary knowledge of the process, procedures and machinery involved in these jobs. This training goes a long way towards making the operation smooth and reduces the risk of injury or loss to both workers and property. This introductory health and safety course is designed to address the concerns of the worksite. We cover the principles of rigging and lifting and provide you with a deep understanding of each device used to perform the job. We then explain safe handling and operating procedures to reduce the risk of accidents.
 This course is created from a beginner's perspective and teaches you everything on the topic thoroughly from scratch. We begin by introducing you to the principles and elements of rigging and lifting and then take you through the provisions and measures designed to make worksites safe. Our lessons then guide you through the various instruments, systems and devices used to perform the job and provide the best practices used to handle them. By the end of this course, you will be confident enough to recognize the devices and tools being used in the rigging and lifting process and understand the safe working procedures involved with each.
 Whether you are experienced or new to such work, this health and safety course aims to provide practical guidance for all the relevant personnel involved in and around rigging and lifting work. This course is ideal for workers, supervisors and managers involved in lifting and rigging operations at construction sites, warehouses and job sites to ensure a safe workplace. This course content meets the occupational health and safety standards for the workplace and thus upgrades your skills. Sign up to this health and safety course to learn how to reduce risk and protect construction workers and equipment from rigging and lifting accidents.

Writing as Enchantment: Inside Alan Moore’s BBC Maestro Course

2000+ Free Developer and IT Certifications

6 Best Node.js Courses in 2025

8 Best Crochet Courses for 2025: Practical, Enriching, Creative

Udemy Faces Instructor Backlash Over Widespread Course Rating Glitch

31 Most Popular Online Courses Starting in June 2024

Beginning to Program: Review of CS50 Scratch Course

How GenAI Costs Sank Duolingo’s Stock 20% (A Non-AI Generated Analysis)

10 Best Free Rust Courses for 2025: Write Memory-Safe Code

[2025] 150+ Online Courses to Help Your Career

The Series Finale of Online Education: Coursera Acquires Udemy

10 Best Guitar Courses for Beginners in 2025

2025’s Online Education Shakeup Claims Another: Skillshare’s CEO Departs

8 Best Geology Courses for 2025

9 Best Quilting Courses for 2026: Turn Fabric Scraps Into Heirlooms

11 Best TypeScript Courses for 2025

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.